Lemon dryer machine is a kind of continuous production drying equipment, the main heating way has electric heating, steam heating, hot air heating. Its main working principle is to spread the material evenly in the network. The material is moved in the dryer by the operation of the machine, and the hot air draws out the water vapor of the material. so as to achieve the purpose of drying. The operation temperature is 40-120 degree centigrade. And the dry cycle is 1-5 hours.
It is suitable for commercial crops such as lumps, strips, flakes, and granules, such as: onions, garlic, peppers, apricots, melon seeds, peanuts, sweet potatoes, potatoes, cassava, wolfberry, red dates, herbs, melons, vegetables, fruits, etc.
Mesh belt dryer is a continuous drying equipment for batch production. It is used for drying flake, strip and granular materials with good air permeability. It is especially suitable for materials whose temperature is not allowed to be high; this series of dryers have the advantages of fast drying speed, high evaporation intensity, and good product quality. For paste materials such as dehydrated filter cakes, they need to be granulated or made into strips before drying.
Place the lemon on the conveyor belt of the lemon dryer. The lemon is spread on the feeder by the homogenizing device on the conveyor belt.The stacking thickness of lemon is 10-20CM. After the lemon enters the lemon dryer, it runs in an"S" shape in the dryer. The transmission part of the lemon dryer adopts a variable-frequency speed-regulating motor, which can control the internal operation time of the drying according to the difference of the water content of the lemon. The wind speed and wind pressure generated by the hot air blower make the hot air fully and evenly distributed inside the lemon dryer. Because the lower pressure is greater than the upper pressure, the hot air naturally moves upward, passing through each layer of the mesh belt, plus the movement and rolling of the lemon, Make the lemon fully contact with the hot air. fully heat exchange, and improve the drying efficiency. The dried lemon will drain through the last layer.
DW series multi-layer belt dryer is a continuous drying equipment for batch production. It is suitable for large-scale production of difficult-to-dry materials with low drying rate. The equipment has compact structure, small floor area, simple operation, convenient maintenance and stable operation.
Model | DW-5-1.2-8 | DW-5-1.2-10 | DW-5-1.6-8 | DW-5-1.6-10 | DW-5-2-8 | DW-5-2-10 | |
Width of belt(m) | 1.2 | 1.6 | 2 | ||||
Length of dry section(m) | 8 | 10 | 8 | 10 | 8 | 10 | |
Thickness of raw material spreading(mm) | 10-50 | ||||||
Operation temperature(℃) | 50-120 | ||||||
Steam pressure(MPa) | 0.2-0.5 | ||||||
Steam consumption(kg/h) | ≤2Kg steam/evaporating 1kg water (for vegetables and herbal pieces) | ||||||
Drying capacity(kg water/h) | 100-250 | 120-350 | 110-320 | 140-320 | 150-450 | 200-550 | |
Total power(kw) | 21.2 | 22.7 | |||||
Overall dimensions | L(m) | 11 | 12.5 | 11 | 12.5 | 11 | 12.5 |
W(m) | 1.6 | 1.6 | 2.0 | 2.0 | 2.4 | 2.4 | |
H(m) | 2.7 | 2.7 | 2.7 | 2.7 | 2.7 | 2.7 | |
Weight(kg) | 3800 | 4780 | 4400 | 5550 | 5350 | 6800 | |
Note: Multi-layer mesh belt dryers are available in 3, 5, 7 and 9 layers. |