Dingli chilli drying machine is continuous type mesh belt industrial drying system, is the good choice drying machine for large scale chili drying production. It has the advantage of fast drying speed, high evaporation intensity, high production efficiencyand best product quality. The running speed, drying temperature and humidity can be adjusted to meet the different chili condition and drying requirement.
Chili drying machine can efficiently and quickly dry chili with high quality. During the drying process, the chili will be completely dried without changing color, aroma, and nutritional content, which can make the pepper have higher commercial value.
For different kinds of chili and product requirements, the temperature, humidity, drying time will be relatively different during the drying process.
Chili drying machine is with wide application, which can be used to process fruit chips, apple chips, mango, pineapple, mushroom, chili, ginger, garlic, onion, moringa leaves, etc.
Mesh belt dryer is a drying equipment that uses a steel mesh as a transmission belt to carry materials through electric heating, steam heating, natural gas heating, etc. for continuous drying. Widely used in industry and are mainly used to dry small pieces of materials and fibrous materials.
Materials are uniformly put on the mesh-belt by the feeder. The mesh-belt uses generally 12-60 mesh stainless steel wire net and it is drawn and moved inside the drier by a transmission device. The drier is composed of several units. For each unit, the hot air is circulated separately. Some exhausted gas is discharged with a special moisture elimination blower. The waste gas is controlled through an adjustment valve. The hot air passes through the mesh-belt covered with the material from the top to the bottom or from the bottom to the top and this will complete the heat and mass transfer process. This process will bring the material water away. The mesh-belt moves slowly, running speed can be freely adjusted according to the material temperature. The final products after drying will fall into the material collector continuously. The top and low circulation units can be freely equipped according to the users’ demand. The unit number can be selected according to the demand.
DW series multi-layer belt dryer is a continuous drying equipment for batch production. It is suitable for large-scale production of difficult-to-dry materials with low drying rate. The equipment has compact structure, small floor area, simple operation, convenient maintenance and stable operation.
Model | DW-5-1.2-8 | DW-5-1.2-10 | DW-5-1.6-8 | DW-5-1.6-10 | DW-5-2-8 | DW-5-2-10 | |
Width of belt(m) | 1.2 | 1.6 | 2 | ||||
Length of dry section(m) | 8 | 10 | 8 | 10 | 8 | 10 | |
Thickness of raw material spreading(mm) | 10-50 | ||||||
Operation temperature(℃) | 50-120 | ||||||
Steam pressure(MPa) | 0.2-0.5 | ||||||
Steam consumption(kg/h) | ≤2Kg steam/evaporating 1kg water (for vegetables and herbal pieces) | ||||||
Drying capacity(kg water/h) | 100-250 | 120-350 | 110-320 | 140-320 | 150-450 | 200-550 | |
Total power(kw) | 21.2 | 22.7 | |||||
Overall dimensions | L(m) | 11 | 12.5 | 11 | 12.5 | 11 | 12.5 |
W(m) | 1.6 | 1.6 | 2.0 | 2.0 | 2.4 | 2.4 | |
H(m) | 2.7 | 2.7 | 2.7 | 2.7 | 2.7 | 2.7 | |
Weight(kg) | 3800 | 4780 | 4400 | 5550 | 5350 | 6800 | |
Note: Multi-layer mesh belt dryers are available in 3, 5, 7 and 9 layers. |