Solutions to common faults in mesh belt drying equipment
2024-11-11
Mesh belt drying equipment is a type of equipment commonly used in industrial production. Common faults may affect production efficiency. The following are some common faults of mesh belt drying equipment and their possible solutions:
1. The mesh belt is loose or offset:
Solution: Check the mesh belt tensioning system to ensure that the mesh belt is installed correctly and whether the fastening screws are loose. Repair or replace loose parts.
2. Temperature instability:
Solution: Check the temperature controller and sensor to make sure they are working properly. These parts may need to be calibrated or replaced. Make sure ventilation systems are functioning properly to ensure even temperature distribution.
3. Mesh belt material wear:
Solution: Check the mesh belt material regularly and replace worn or damaged parts. Make sure the mesh belt is properly tensioned to prevent unnecessary wear.
4. The raw materials cannot be dried at one time:
Solution: Choose the right size dryer equipment. In addition, incorrect wind pressure and flow calculations in the wind network can also cause such failures.
Check the temperature control system regularly and clean the air ducts of debris.
Note that for maintenance and troubleshooting of mesh belt drying equipment, it is best to rely on experienced technicians or maintenance teams. If you do not have the necessary technical knowledge, do not attempt to repair the device yourself to avoid causing more serious problems or safety risks.