Mesh belt dryer is a kind of drying equipment commonly used in industrial production. It is used to dry materials with high humidity through conveyor belts. Drying temperature control is usually achieved through the following methods:

1. Temperature sensor: A temperature sensor is usually installed inside the mesh belt dryer to monitor the temperature in the drying room in real time. The sensor will feedback the temperature signal to the control system.

2. Heater: Mesh belt dryers usually use heaters to provide heat sources. The power of the heater can be adjusted through the control system to control the temperature in the drying chamber. The heater can be an electric heater, a steam heater, a gas heater, etc. Choose the appropriate heating method according to the specific situation.

3. Fan and ventilation system: Mesh belt dryers are usually equipped with fans and ventilation systems to circulate hot air, speed up drying and maintain uniform temperature in the drying room. The operation of fans and ventilation systems can also be controlled through the control system to achieve the desired drying effect and temperature.

4. Control system: The mesh belt dryer is equipped with a control system that can control the temperature based on the feedback signal from the temperature sensor. The control system can adjust the power of the heater or other heat sources to control the temperature in the drying chamber.

To sum up, the drying temperature of the mesh belt dryer is monitored by the temperature sensor, and then controlled by the control system by adjusting the power of the heater. Other auxiliary equipment such as fans and ventilation systems will also operate under the guidance of the control system to achieve the required drying temperature and effect.

• Prev: How is the belt speed of the mesh belt dryer determined?
• Next: What is the moisture content of onions after being dried in a mesh belt dryer?